Haze has been the most urgent air pollution problem that needs to be resolved in China. Hebei is the haziest province, which is partially due to the high density of emissions in local and the complicated regional emission environment. Source identification and contribution analysis are urgent needed to support the policy making over this area. This study, based on our previous reseaches, fully considering the characteristics of high haze frequency, extremely low visibility, complicated source contributions with high spatial and temporal variations in Hebei, will simulate the haze processes in a relatively long time using the WRF-CMAQ air quality modeling system with aerosol-meteorology feedback mechanism, to firstly identify the different characteristics and pollution patterns in Hebei, and quantify the influence of the aerosol-meteorology feedbacks. Then the contributions of the local and regional sources to the PM2.5 concentrations in Hebei will be assessed using the Brute Force method, and the key sources which have strong correlation, consistency and synchronization with the peak PM2.5 concentrations will be recognized using the sequential factorial analysis method. Third, the contribution mechanism of those key sources will be clarified using the process analysis tool to quantify the direct and in-direct contributions. Finally, the suggested air pollution control strategies for Hebei will be proposed base on the above findings, and the national, provincial, and local action plans.
霾已经成为我国最亟待解决的大气环境问题。河北是我国霾污染最严重的省份,这与该地区高强度的污染物排放以及周边复杂的排放环境有关,源识别和源贡献研究的需求十分迫切。本研究将在以往的研究基础上,针对这一地区严重霾污染频发、能见度极低、污染来源复杂、随时空多变的特征,在考虑气溶胶-气象反馈的情况下,应用WRF-CMAQ空气质量模拟系统对较长时间内该地区发生的霾污染过程展开模拟,识别不同的污染特征和污染模式,量化气溶胶-气象反馈在重污染形成过程中的作用;应用Brute Force方法计算本地及周边各类源对河北地区PM2.5的浓度贡献,并采用析因子分析法识别严重霾污染过程中与PM2.5浓度高峰强烈相关、具有高度一致性和同步性的关键源;应用过程分析工具解析关键源的贡献机制,明确直接和间接贡献的大小,以期为该地区的霾污染控制提供决策支持。
河北是我国霾污染最严重的省份,PM2.5来源和贡献研究的需求十分迫切。本研究应用三维空气质量模型WRF-Chem对河北地区的重污染过程进行了模拟,量化了气溶胶-气象反馈在重污染形成过程中的作用,采用Brute-Force方法计算了河北地区PM2.5的主要来源和浓度贡献,通过打开和关闭气溶胶-气象反馈机制并将结果进行对比,分析了这一机制对主要污染源浓度贡献计算结果的影响,最后采用析因子分析法识别和分析了严重污染过程中关键源,并在此基础上提出了秋冬季重污染的控制建议。研究结果表明,考虑气溶胶-气象反馈会提高模拟结果的准确度。在考虑气溶胶-气象反馈的情况下,地面短波辐射通量在河北南部地区将减少20–27.5 W m-2 (16–24%),温度降低0.3-0.5oC,混合层高度下降20-50m(4-18%),PM2.5浓度升高3-20 ug m-3(3-9%)。尽管3-9%的增幅并不十分明显,但在严重污染时段(>400 ug m-3),河北南部石家庄、邢台、邯郸三个重污染城市的升幅可以达到50 ug m-3(10%)以上;重污染时段(200-400 ug m-3),升幅在10 ug m-3(5%)左右;污染较轻时段(≤ 200 ug m-3)时,影响较小(小于3%),甚至为负值,表明重污染时段的预测和控制必须考虑气溶胶-气象的直接反馈作用。考虑气溶胶-气象反馈的情况下,工业和民用源的贡献率会明显大于不考虑气溶胶-气象反馈的情况,特别是重污染时段,也就是说,不考虑这一反馈机制可能造成工业和民用源贡献率的明显低估。
{{i.achievement_title}}
数据更新时间:2023-05-31
居住环境多维剥夺的地理识别及类型划分——以郑州主城区为例
基于细粒度词表示的命名实体识别研究
基于协同表示的图嵌入鉴别分析在人脸识别中的应用
适用于带中段并联电抗器的电缆线路的参数识别纵联保护新原理
基于Pickering 乳液的分子印迹技术
大气污染物浓度时间序列中污染源及气象因素贡献的解析方法研究
京津冀区域黑碳气溶胶排放对雾霾及气象的影响研究
关中盆地气象条件与气溶胶变化对霾能见度恶化影响及模拟研究
华北地区大气化学/气溶胶-辐射-气象相互作用机制及其对大气复合污染的影响