Wide road construction and rehabilitation in Chinese cities brings a large number of work zones on roads. So many urban work zones cause a series of problems including heavy congestion, frequent traffic accident and high travel delay cost. Researchers cannot answer how to solve these problems, because the mechanism of the influence of work zones on traffic flow is not clear yet and there is not a simulation system for traffic flow in work zones. This project attempts to derive the mechanism of the influence of urban work zones on traffic flow by analyzing the work zone data and traffic flow data and obtain the characteristics of traffic flow in urban work zones. Furthermore, the project proposes a new traffic flow model that can reflect the characteristics of the traffic flow in urban work zones based on a new traffic flow modeling theory developed by this project, T-Swarm Theory. The proposed model overcomes the difficulties of the existing traffic flow models in studying the traffic flow in urban work zones. By taking advantage of the proposed model, a simulation system of the traffic flow in urban work zones is constructed. The simulation system compensates the weakness of the absence of the work zone module in the existing traffic flow simulation tools. The project establishes the basic theory of the traffic flow in urban work zones, and provides a key simulation tool in analyzing and optimizing traffic organization in urban work zones for transportation agencies.
我国很多城市正在进行大范围道路施工,产生了大量施工作业区。由于当前对城市道路作业区影响交通流的机理认识尚不清楚,更缺乏分析作业区交通流的数学模型和仿真系统,我国城市道路作业区面临着交通拥堵严重、交通事故频发、交通延误成本高等问题。鉴于此,本项目通过对城市道路作业区数据和交通流数据的深度分析和挖掘,揭示出作业区影响交通流的内在机理,并推演出作业区交通流区别于常规道路交通流的基本特点。然后,利用本项目提出的适用于城市道路作业区交通流建模的新理论——T-Swarm理论,建立可以反映城市道路作业区交通特点的交通流模型,打破现有交通流模型在研究作业区交通流时的局限。最后,以新建模型为基础搭建城市道路作业区交通流仿真系统,弥补现有软件在仿真作业区交通流时不能考虑作业区特征的缺点。本项目建立了城市道路作业区交通流的基础理论,也为城市交通建设和管理者提供了分析和优化城市道路作业区交通组织的仿真分析工具。
我国城市道路施工具有范围广、面积大、延续时间长的特点,给城市交通带来了巨大的负面影响。然而,目前我国城市道路施工区交通流的机理尚未认识清楚,基本的交通流模型还未建立,针对施工区特征的交通规划与设计方法还鲜有进行讨论,严重制约了我国解决施工区交通问题的进度。在这种背景下,本项目对施工区交通问题进行了初步研究,采集了大量的施工区交通数据,分析了我国城市道路施工区的基本特点,建立了施工区的微观交通流模型,并在交通流模型的基础上构建了城市道路施工区的仿真平台,对施工区的交通流特点进行了深入分析和探讨。本研究根据施工区处于不同的位置将其划分为三类:信号交叉口岛式施工区,信号交叉口横跨式施工区和路段施工区。然而,分别针对三类施工区特性提出了相应的基于社会力的微观交通流模型,并使用实测数据对各类模型进行标定和验证。最后通过搭建的施工区交通流仿真平台对施工区内交通流特性进行仿真分析。即通过改变一些因素的取值,分析该因素对此施工区交叉口或路段交通流的影响。研究发现本项目建立的施工区交通流模型在反映施工区交通流特点方面获得了较高的精度,相对传统模型,其优势体现在三个方面:第一,能够更好的反映交通流的异质性;第二,在针对于无车道划分的交通流时更加适用;第三,适用于可通行区域的任何边界形状。在众多影响因素中,施工区的尺寸、施工区在交叉口中的相对位置、大型车的比例,非机动车的数量都对施工区的通行能力有着重要的影响。
{{i.achievement_title}}
数据更新时间:2023-05-31
基于分形L系统的水稻根系建模方法研究
拥堵路网交通流均衡分配模型
An alternative conformation of human TrpRS suggests a role of zinc in activating non-enzymatic function
卫生系统韧性研究概况及其展望
面向云工作流安全的任务调度方法
基于需求心理信息与物理建模相融合的城市道路智能交通综合仿真系统研究
有应急车辆的城市道路混合交通流建模与特征参数研究
车路协同环境连续交通流微观建模与仿真研究
基于PM2.5减排的城市道路交叉口交通流的动力学建模与优化